Manufacturer JL Industries
SKU: FD2-Series
Oversized Wall or Ceiling Fire Rated Access Panel

An oversize two-hour fire rated single-leaf access panel the FD2 Series is the largest net size available installation in wall or ceiling.   Ideal for installation when the removal or the installation of equipment is a consideration.

  • Material: Satin finish galvanized steel or 304 stainless steel
  • Frame: 16 ga galvanized steel up to and including 30" x 48" or 14 ga steel for larger sizes. Depth 2-1/4"
  • Flange: Width-7/8" up to and including 30" x 36" or 1-1/4" for larger sizes
  • Door Panel: 18 ga galvanized steel with 22 ga liner
  • Insulation: The door panel contains 1-1/2" of high temperature insulation material.
  • Finishes: Rust inhibitive off-white prime coat or #4 stainless steel finish on exterior surface
  • Hinges: The concealed continuous rod hinge is designed to secure the door panel.  The hinge is placed on the long side of the door (" H" Dimension) unless otherwise requested.  Note: Sizes greater than 48" in a wall position, a continuous piano hinge is standard.
  • Panel Closer: The automatic panel closer will close and latch the door from an open position of approximately 90° as required by NFPA 80.
  • Latch: The standard factory installed latch is a flush mount 1/4" allen key.    All fire-rated doors are self-latching and include an interior latch release mechanism allowing the door to be open from the inside for sizes 16" x 16" and larger. Interior latch for smaller sizes is available as an option.
Additional Product Literature
Data Sheet

Comparable model is the Maxam FCI-150

« Previous | Next »