Enlarge  
Manufacturer JL Industries
SKU: FD2CT-Series
Recessed Flange and Recessed Door Fire Rated Access Panel

An access panel with both a recessed frame for a trimless appearance and a recessed door, the FD2Ct Series will accept tile or a wallboard insert to match the surrounding walls.

  • Materials:  Satin finish galvannealed steel or 304 stainless steel.
  • Frame: 16 ga steel.  Depth 2-7/8".
  • Flange: Concealed flange is recessed 5/8" to allow for wallboard installation on top.  Flange is 1-1/4" wide.
  • Door Panel: 18 ga. Liner-22 ga.  Face of door is recess 5/8" to accept tile or wallboard insert.
  • Insulation:  the door panel contains 1-1/2" of high temperature insulation.
  • Finishes: Rust-inhibitive off-white prime coat or 2b mill finish stainless steel.
  • Hinges: The continuous piano hinge allows the door panel to open 175° for easy access.  The hinge is placed on the long side of the door ("H" dimension) unless otherwise requested.
  • Panel Closer: The automatic panel closer will close and latch the door from an open position of approximately 90° as required by NFPA 80.
  • Latch: The standard factory installed latch is a flush mount 1/4" allen key.  All fire-rated locks are self-latching and include an interior latch release mechanism allowing the doors to be opened from the inside.  The interior latch release is standard on doors including and exceeding 16" x 16".  Latch release for smaller sizes is options.
  • Sizes: Minimum size 12" x 12", maximum size 24" x 36".
Additional Product Literature
Data Sheet
Warranty

Comparable model is the Maxam FTA-150